New EPDM Installation
EPDM roofs for commercial buildings, additions, porches and other low-slope areas.
Request a Quote →EPDM is a durable rubber membrane with a long track record on flat and low-slope roofs. Get EPDM repairs, installation and replacement for commercial buildings, additions and porches.
EPDM (ethylene propylene diene monomer) is a synthetic rubber membrane used on flat and low-slope roofs for decades.
It is installed in large sheets with seams joined by tape or adhesive, and it stays flexible through summer heat and winter cold.
EPDM is often chosen for its durability and because it is straightforward to inspect and repair.
Discuss an EPDM Roof →
Installation, repair and maintenance for rubber roofing systems.
EPDM roofs for commercial buildings, additions, porches and other low-slope areas.
Request a Quote →Replace an aging rubber roof or convert a failing low-slope roof to a new membrane.
Roof Replacement →Patch punctures and tears and repair seams that have started to separate.
Roof Repair →Reseal seams and rework flashing around drains, walls and penetrations.
Commercial Roofing →Repair wind and debris damage to membranes, edges and flashing.
Storm Damage →Check seams, flashing, drains and membrane condition before small issues grow.
Roof Inspections →Both are single-ply membranes for low-slope roofs, with some key differences.

Rubber membrane, usually black, with taped or adhered seams. Flexible across temperature swings and easy to patch.

White thermoplastic membrane with heat-welded seams. Reflective surface helps limit heat gain in summer.
What to watch for on a rubber roof.
Adhesive or tape seams can loosen over time and let water in.
Debris, foot traffic and branches can damage the membrane.
Older membranes can shrink and pull at edges and flashing.
Walls, vents, drains and curbs are common leak points.
Standing water after rain points to drainage problems.
Cracking or chalky surfaces suggest an aging membrane.
A straightforward process for evaluating your roof and planning the right next step.
Tell us about your building, location and roofing concerns.
Review the membrane, seams, flashing and drainage.
Discuss repair, coating, recover or replacement options.
Set the scope of work and schedule around your operations.
Greenville NC Roofing works on rubber and other low-slope roofs throughout Greenville and nearby communities.
Call to discuss EPDM repairs, recovery or replacement for your building.
Call 252-632-6852 →Common questions about rubber roofs in Greenville, NC.
EPDM is a synthetic rubber membrane used on flat and low-slope roofs. It is installed in large sheets with taped or adhered seams.
Yes. Punctures, tears and loose seams can usually be patched if the rest of the membrane is in good condition.
Neither is better for every building. EPDM is flexible and easy to repair; TPO is reflective with heat-welded seams. Your roof’s condition, use and budget decide the best fit.
It depends on membrane thickness, installation, exposure and maintenance. An inspection gives the best idea of remaining life.
Yes. EPDM is common on low-slope sections of homes such as porches, additions and carports.
Ponding usually comes from clogged drains, sagging insulation or deck problems. It should be checked because it stresses seams and the membrane.
Call now or request a free quote for EPDM repair, installation or replacement.